Merit International, 1/48 scale
S u m m a r y | |
| Catalogue Number: | Merit International Kit No. 64801; U.S. Navy Elco 80' Motor Patrol Torpedo Boat Late Type |
| Scale: | 1/48 |
| Contents and Media: | Approximately 142 grey coloured plastic parts (27 unused); 9 clear plastic parts; 2 grey resin parts; 2 frets of photo-etched brass pieces (1 pre-painted, 1 unpainted); 1 sheet of die-cut tape masks; 1 decal sheet containing markings for 5 aircraft; 12 page full colour instruction booklet. |
| Price: | Retail price US$93.00 |
| Review Type: | FirstLook |
| Advantages: | Nice size for this type of boat; plenty of details provided and nice parts breakdown with slide molding used to capture many aspects. |
| Disadvantages: | Only one version possible with this kit |
| Conclusion: | Highly recommended for all “splinter fleet” fans or late WWII US Navy fans. |
Reviewed by Cookie Sewell
Into the fray comes this nice new kit from Merit in a more sensible 1/48 scale. The model is now a more manageable 20" long and 5" in beam, so more suited to a shelf or reasonable diorama size. Merit has done their homework and the kit shows that it matches the late war fittings very nicely.
It comes with all fittings for the late war Elco: 37mm gun forward, two twin .50 tubs, a 20mm cannon, 40mm Bofors, four Mk. XIII torpedoes, and the twin flip-out 4.5" rocket launchers. It has the “streamlined” radar antenna with additional antennas fitted to the mast as well as the small skiff carried by later production boats (early ones had only a small life raft).
From the directions it can be seen that different versions of the Elco will be released later on, as there are a large number of pre-marked holes on the underside of the deck and this kit only needs about two-thirds of them opened up prior to Step 1.
Kit construction begins with the assembly of the deck to the hull, and the 20mm Oerlikon gun. This comes with two spare 60 round drums. Step 3 installs the propeller skegs and rudders as well as the shafts; these are plastic and some modelers may prefer to replace them with brass rod for durability. Also covered are the 20mm ammo lockers with one suggested to be shown open with the spare drums in it.
Step 6 is the assembly of the twin .50 sets and each one consists of 20 parts; they are fixed in elevation but made be traversed once complete. Next is the 37mm bow gun which is far simpler, but then again so was the original.
Step 9 covers the deck house and its windows; the kit claims they are PVC plastic but the sheet looks like styrene; personally, I use something like Micro Krystal-Kleer or Future acrylic wax to stick them in so if done that way should not be a problem. Also included is the radar mast; this is a fixed mast on this kit and is not designed to fold down into its non-operational position.
Step 10 is the pilot house which is very similar. Super-detailers may wish to enhance the coxswain’s position with finer throttle levers and other bits seen in closeups of the area on the actual boats; all the kit provides is an instrument panel and ship’s wheel with a relatively simple throttle quadrant.
Step 11 is the 40mm Bofors which is nearly as detailed as the much larger 1/35 gun on the Italeri kit and consists of nearly the same number of parts!
The next step covers the engine room cover and ventilator assembly, as well as the deflector to prevent the 40mm gun from hitting the bridge area.
Steps 14-16 cover the four torpedoes and their racks, and 17 provides for the ammo storage lockers for the 4.5" rocket launchers. These made shown open or closed. 18 are the rocket launchers, which can be swivelled inboard for loading/stowage or outboard for firing.
19/20 are the mufflers with the very delicate control rods for the bipass valves offered as single left and right assemblies.
The rest of the direction steps cover mostly attaching the previously assembled components to the deck. The last step covers the sturdy stand and identification plate, but most modelers will probably want to assemble this FIRST so you have a safe place to set the model when working on it!
The finishing directions cover only one boat in two-color black and dark green paint with the reddish lower hull, but these boats had a multitude of schemes and finishes in many other colors and schemes. Happily Merit provides a full decal sheet with two sets of large hull numbers and six small sets (0-9) as well as two US flags; alas, the latter are completely useless as they are 50 star flags! (48 was the WWII size.) A draft gauge from 6 feet down is also given.
It is likely this kit will soon see targeted decal and marking sheets based on available photos as well as crew figures, and perhaps some different armament combinations. An early version is likely to follow soon based on the hole pattern under the deck and parts breakdown.
I used the two Squadron “In Action” books as references for the review - 4007 by T. Garth Connelly and 4034 by David Doyle, who also has an “On Deck” book on 80' Elco boats from Squadron for super-detailers.
Conclusion |
Overall this is a lovely kit and a really decent size to permit extensive detailing and finishing and still not require a garage for storage!
Highly recommended.
Sprue Breakdown
– 1 Lower hull
– 1 Deck
A 2 Deck house, pilot house
B 22 Skiff, life raft, radar mast, gun tubs, deck mounting plates
C 24 Name plate, combings, gun tub deflectors, 37mm gun
D 31 Guards, rails, stanchions
E 59x2 Torpedoes, racks, rocket launchers
F 41 40mm Bofors mount, ammo clips
G 15x4 Propeller, rudder, mufflers, ventilators
J 31x2 .50 caliber machine gun sets, bitts, cleats, gun tub rings
H 16 Smoke generator, anchor, exhaust cutout valves, 20mm gun
K 4 Stand
PE 22 Etched brass
PVC 13 Clear plastic
Thanks to Tony Chin of Merit for the review sample.
Review Text and Images Copyright © 2014 by Cookie Sewell
Page Created 30 May, 2014
Last updated 30 May, 2014